Product Description
Carbide set hammer. You “set” the blade onto your stone and hit with another hammer.
- With ashwood or hickory handle
- One 8mm tungsten carbide blade 50 mm for 3kg and 60mm for the 4 kg
- Hammer face lightly crowned, hardened and polished
- Available in 3 and 4kg versions
Instructions
– On uneven surfaces it is advised to hit lightly until the full width of carbide is in contact with the stone
– Use the correct size
– Hit with the full width of the tool
Grinding advice
– Do not grind the carbide too sharp
– After grinding, give an edge to the corner
– Do not overheat. Do not quench
– Hold the chisel steady against the grinding disc
Always wear eye protection
Made in Germany for the StoneToolShop.
Tool care advice to extend the lifespan of the shaft: before first use all wooden handled hammers should be lightly sanded and raw linseed oil liberally applied (especially on the ends). This should be repeated when required.
