type2

Bavaria mason’s double sided carbide point axe

From: £120.91 ex. (£145.09 inc. VAT)

Clear

Product Description

Carbide masons axe with carbide point on both sides

  • With ashwood handle
  • Type T/T – 5mm tungsten carbide points on both sides

Available in 5 sizes

  • 40mm – 1.1 kg 4 pts each side
  • 50mm – 1.2 kg 5 pts each side
  • 60mm – 1.3 kg 5 pts each side
  • 80mm – 1.5 kg 6 pts each side
  • 100mm – 1.8 kg 8pts each side

All ca. 450mm long  x 180 mm

Instructions

– On uneven surfaces it is advised to hit lightly until the full width of carbide is in contact with the stone
– Use the correct size
– Hit with the full width of the tool

Grinding advice

– Do not grind the carbide too sharp
– After grinding, give an edge to the corner
– Do not overheat. Do not quench
– Hold the chisel steady against the grinding disc

Always wear eye protection

Made in Germany for the StoneToolShop.

 

 

Tool care advice to extend the lifespan of the shaft: before first use all wooden handled hammers should be lightly sanded and raw linseed oil liberally applied (especially on the ends). This should be repeated when required.

Additional Information

Head size

1.1kg (40mm), 1.2kg (50mm), 1.3kg (60mm), 1.5kg (80mm), 1.8kg (100mm)