Product Description
Carbide masons axe with carbide point on both sides
- With ashwood handle
- Type T/T – 5mm tungsten carbide points on both sides
Available in 5 sizes
- 40mm – 1.1 kg 4 pts each side
- 50mm – 1.2 kg 5 pts each side
- 60mm – 1.3 kg 5 pts each side
- 80mm – 1.5 kg 6 pts each side
- 100mm – 1.8 kg 8pts each side
All ca. 450mm long x 180 mm
Instructions
– On uneven surfaces it is advised to hit lightly until the full width of carbide is in contact with the stone
– Use the correct size
– Hit with the full width of the tool
Grinding advice
– Do not grind the carbide too sharp
– After grinding, give an edge to the corner
– Do not overheat. Do not quench
– Hold the chisel steady against the grinding disc
Always wear eye protection
Made in Germany for the StoneToolShop.
Tool care advice to extend the lifespan of the shaft: before first use all wooden handled hammers should be lightly sanded and raw linseed oil liberally applied (especially on the ends). This should be repeated when required.